Duro-last Drain Boot Bedienungsanleitung PDF herunterladen

Duro-Last: The Proven Performer®

"Duro-Last" and "The World's Best Roof" are registered marks owned by Duro-Last , Inc.

DATA SHEET

www.duro-last.com

800-248-0280

DURO-LAST® DRAIN BOOT

Description:

Duro-Last® prefabricated Drain Boots can be used in

most circular roof drains and are especially useful in

reroofing applications. They are fabricated from

Duro-Last's specially formulated roofing membrane.

The combination of reinforced membrane and

prefabrication ensures a long lasting, watertight

flashing.

The sleeve of the drain boot is a different color than

the base to differentiate it from Duro-Last Stack

Flashings. The base is available in white, tan, gray,

dark gray and terra cotta as well as in the Designer

Series membranes (slate gray Shingle-Ply

,

sandstone Shingle-Ply

 and Rock-Ply) and are

usually ordered to match the roof membrane.

Drain boots are prefabricated 12 inches (305 mm) in

depth. Special orders are available upon request.

Installation:

1. The roof membrane installed around the drain

must be fastened prior to installing the drain boot

flashing. Use the same fastener spacing that was

used to install the roof membrane but do not

exceed 18 inches (457 mm) on center. A minimum

of one fastener must be installed.

2. Apply Duro-Caulk

® Plus to the outside of the drain

boot before it is inserted into the drain pipe.

3. Once inserted, the drain boot shall be heat welded

(hot-air) to the field membrane.

4. A pair of expandable composite drain rings (CDR)

should then be installed as low into the drain boot

as possible, with a minimum depth of 6 inches

(152 mm).

5. Sealant and CDRs must be installed at the same

depth in the drain.

6. Refer to detail 2020 for installation information.

DRAIN BOOT DIMENSIONS

[All sizes have 24 x 24 in. (610 x 610 mm) base]

DRAIN DIAMETER SLEEVE DIAMETER

2 in. (51 mm) 1.875 in. (48 mm)

3 in. (76 mm) 2.875 in. (73 mm)

3.5 in. (89 mm) 3.25 in. (83 mm)

4 in. (102 mm) 3.875 in. (98 mm)

4.5 in. (114 mm) 4.25 in. (108 mm)

5 in. (127 mm) 4.875 in. (149 mm)

5.5 in. (140 mm) 5.25 in. (133 mm)

6 in. (152 mm) 5.875 in. (149 mm)

6.5 in. (165 mm) 6.25 in. (159 mm)

7 in. (178 mm) 6.875 in. (175 mm)

7.5 in. (191 mm) 7.25 in. (184 mm)

8 in. (203 mm) 7.875 in. (200 mm)

Revised: 4/6/2011

Drain Boot

(Install per detail drawing 2020)

® DRAIN BOOT 1

Inhaltsverzeichnis

Seite 1 - ® DRAIN BOOT

Duro-Last: The Proven Performer®"Duro-Last" and "The World's Best Roof" are registered marks owned by Duro-Last , Inc.DATA SH

Kommentare zu diesen Handbüchern

Keine Kommentare

Duro-last Drain Boot Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Duro-last Drain Boot herunter. Duro-Last Drain Boot User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Duro-last Drain Boot