Duro-last EHD Screws Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Duro-last EHD Screws herunter. Duro-Last EHD Screws User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Duro-Last: The Proven Performer®
"Duro-Last" and "The World's Best Roof" are registered marks owned by Duro-Last , Inc.
www.duro-last.com
800-248-0280
DATA SHEET
2009
19
DURO-LAST® EHD SCREWS
EHD SCREW DIMENSIONS
Screw Length
Thread Length
Quantity per
Bucket
2 in. (51 mm) 2 in. (51 mm)
1000
3 in. (76 mm) 2.875 in. (73 mm)
1000
4 in. (102 mm) 2.875 in. (98 mm)
1000
5 in. (127 mm) 3.875 in. (98 mm)
1000
6 in. (152 mm) 3.875 in. (98 mm)
1000
7 in. (178 mm) 3.875 in. (98 mm)
500
8 in. (203 mm) 3.875 in. (98 mm)
500
9 in. (229 mm) 3.875 in. (98 mm)
500
10 in. (254 mm) 3.875 in. (98 mm)
500
11 in. (279 mm) 3.875 in. (98 mm)
500
12 in. (305 mm) 3.875 in. (98 mm)
500
14 in. (355 mm) 3.875 in. (98 mm)
250
16 in. (406 mm) 3.875 in. (98 mm)
250
18 in. (457 mm) 3.875 in. (98 mm)
250
20 in. (508 mm) 3.875 in. (98 mm)
250
Description:
Duro-Last®, Inc. requires the use of Duro-Coated
Screws for the mechanical fastening of the Duro-Last
roofing system and insulation board. Duro-Last EHD
Screws are #15 diameter fasteners equipped with a
P-3 truss head, and a drill point.
When greater fastener pullout resistance is needed
than can be achieved with the Duro-Last HD Screw,
the Duro-Last EHD Screw should be used.
Duro-Last HD Screws can be used in most types of
roofing applications. These Duro-Coated Screws must
pass twice the FM 4470 standard for corrosion
resistance, totaling 30 cycles in a Kesternich cabinet.
Duro-Last, Inc. also requires that all Duro-Coated
Screws pass 20º and 40º bend tests (hardness) and
be able to penetrate a 20 gauge deck in under three
seconds with a 50 lb. (222 N) load.
Installation:
1. Penetration into all deck types is 1 in. (25 mm)
minimum, from the top surface of the deck.
Note:
Duro-Last, Inc. stocks EHD screws in the sizes
noted in the table to the right. Additional sizes are
available on a drop ship basis. Please allow
adequate time for ordering and delivery of special
orders.
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1 - ® EHD SCREWS

Duro-Last: The Proven Performer®"Duro-Last" and "The World's Best Roof" are registered marks owned by Duro-Last , Inc.www.dur

Kommentare zu diesen Handbüchern

Keine Kommentare